###################################################################### # thinkfan 0.7 example config file # ================================ # # ATTENTION: There is only very basic sanity checking on the configuration. # That means you can set your temperature limits as insane as you like. You # can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C. # # That's why this program is called THINKfan: You gotta think for yourself. # ###################################################################### # # IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm) # ==================================================== # # IMPORTANT: # # To keep your HD from overheating, you have to specify a correction value for # the sensor that has the HD's temperature. You need to do this because # thinkfan uses only the highest temperature it can find in the system, and # that'll most likely never be your HD, as most HDs are already out of spec # when they reach 55 °C. # Correction values are applied from left to right in the same order as the # temperatures are read from the file. # # For example: # sensor /proc/acpi/ibm/thermal (0, 0, 10) sensor /sys/class/hwmon/hwmon0/temp1_input # will add a fixed value of 10 °C the 3rd value read from that file. Check out # http://www.thinkwiki.org/wiki/Thermal_Sensors to find out how much you may # want to add to certain temperatures. # Syntax: # (LEVEL, LOW, HIGH) # LEVEL is the fan level to use (0-7 with thinkpad_acpi) # LOW is the temperature at which to step down to the previous level # HIGH is the temperature at which to step up to the next level # All numbers are integers. # # I use this on my T61p: #sensor /proc/acpi/ibm/thermal (0, 10, 15, 2, 10, 5, 0, 3, 0, 3) #fan off (0, 0, 55) #fan ~2000 rpm max (1, 42, 56) #fan ~3000 rpm (2, 54, 60) #fan ~3500 rpm, anything from 3 and above is too loud under quiet environment. (3, 55, 63) (4, 56, 65) (5, 59, 66) (7, 63, 32767) #(0, 0, 55) #(1, 48, 60) #(2, 50, 61) #(3, 52, 63) #(4, 56, 65) #(5, 59, 66) #(7, 63, 32767)